$Spectrum
Home About Us Products Catalogue Company News Technology & Service Contact Us
Products Catalogue
Contact Us
Features of Reflow Soldering Machine

Reflow soldering has the following features:
First, reflow soldering machine do not need to be directly immersed in the molten solder, it is different from wave soldering machine, so thermal shock subjected to components is small.
Second, reflow soldering machine only cast on required site, a significant reduction in the use of solder;
Third, the reflow soldering can control the release of the solder to avoid bridging defects;
Fourth, when the posted position of components has a certain deviation, because of the molten solder surface tension, as long as solder cast position is correct, reflow soldering can automatically correct slight deviation, so that components are fixed in the correct position;
Fifth, the partial heat source may be used, it can be welded using different reflow process on the same substrate.

reflow soldering machine

HomeAbout UsProducts CatalogueCompany NewsTechnology & ServiceContact UsSitemap Copyright © Zhongshan Xinhe Electronic Equipment Co., Ltd