Zhongshan Xinhe Electronic Equipment Co., 

Ltd
Home About Us Products Catalogue Company News Technology & Service Contact Us
About Us
Products Catalogue
Contact Us
Wave Soldering (Short-lead Operation)
Wave Soldering (Short-lead Operation)

 

Wave Soldering also called Wave Oven which belong to household electrical appliances production equipment.

Technical Parameter of Wave Soldering (Short-lead Operation)
Type XH-LF330C XH-LF360B & XH-LF360C XH-LF450C & XH-LF450C/N
Control Method Touch-screen Intelligent Control Touch-screen Intelligent Control & Windows Xp Control System Windows Xp Control System
PCB Size Max.300mm(Non-standard Mode: Max.500mm)
Amplitude Modulation Device Two Groups of Precision Leading Screw Amplitude Modulation,Manual Control Three Groups of Precision Leading Screw Amplitude Modulation,Manual Control Three Groups of Precision Leading Screw Amplitude Modulation,Manual Control(or choose Automatical Control)
Transmission Speed Max.3000mm/min
Pre-heating Zone Length:1200mm (600*2 independently control temperature),Temperature:Ambient 230℃ Length:1500mm (750*2 independently control temperature),Temperature:Ambient 230℃ Length:1800mm (600*3independently control temperature),Temperature:Ambient230℃
Pre-heating Method Drawer,Infrared Pre-heating (without high-temperature glass) Drawer,Infrared Pre-heating (with high-temperature glass) Drawer,2 Infrared and 1 hot air;
Infrared Pre-heating (with high-temperature glass)
Pre-heating Cover Iron sheet structure,without visible window warm-keeping cover Iron sheet structure,without visible window warm-keeping cover Aluminium structure,with visible window warm-keeping cover
Tin Stove temperature Ambient Temp.:350℃
Tin Stove Nozzle Nozzle Width: adjust from 150mm to 300mm (manual adjustment)
Tin Stove Structure All tin liquid cycle fully to keep the same temperature in tin bath,clean nozzle without slag and guide tin slag to operation party for convient maintenance.
PCB Transmission Direction From left to right & from right to left
PCB Transmission Higth 750±20mm
PCB Soldering Tin Angle 5~7°
Rosin Spraying Pressure/Flow 5~6Kgf/c㎡ 10~100ml/min
Soldering Capacity Approx.20 Liters
Nozzle Move Mode Stepping motor,seal,straight-line sliding rail style Stepping motor,seal,straight-line sliding rail style Stepping motor,seal,straight-line sliding rail style,modularity structure,convenient maintenance.
Air Knife Equipment
Flux Flow Regulation
Without Air Knife
Pressure regulate flow
With Air Knife
Pressure regulate flow
With Air Knife
Flux flow regulate flow
Flux Level Control No Alarm on low level Alarm on low level,Automatically add flux flow
Nitrogen Consumption 15-25 Square Meters/Hour & 350-900ppm (Only used for nitrogen wave soldering XH-LF450C/N)
Tin Stove Capacity Single Wave Soldering 240Kg,Double Wave Soldering 350Kg
Stove Body Frame Move up and down or into and out by simple manual screw rod  Move up and down or into and out by simple manual screw rod  Move up and down or into and out easily by maunal turbo
Cooling Mode Cooling by natural air on axial fan board Force nature air cooling by top and botttom board of centrifugal fan Force nature air cooling by top and botttom board of centrifugal fan
Suitable Solder Type Lead-free solder/ Normal solder Lead-free solder/ Normal solder Lead-free solder/ Normal solder
Normal/Starting Power Approx.5KW/18W Approx.6KW/19W Approx.7KW/22KW
Power Supply  Three-phase Five-wire System 380V 50/60Hz
Outline Dimension  L3300*W1200*H1480 L3600*W1200*H1480 L4500*W1200*H1530
Weight 1300Kg 1380Kg 1450Kg
HomeAbout UsProducts CatalogueCompany NewsTechnology & ServiceContact UsSitemap Copyright © Zhongshan Xinhe Electronic Equipment Co., Ltd